TomGW

You’re probably not thinking of this level of a machine but worth a watch, of all 4 episodes, nevertheless.

Going back to your initial post and the suggested option of the more formal, raised brick beds. Don't rule out this option and consider...

I ‘get’ the desire to make it yourself but fully adjustable handles are available in a similar style, if you decide it’s not worth the...

An alternative method would be: Get a sheet of plain card eg side of Cornflakes box Remove your router from the table Fit screws into...

Take a look at the wheel kit for the SIP 01332 table saw. It is an excellent concept, making the saw easily manoeuvrable yet it sits...

Specsavers HQ

We must be from the same era. I well remember my granny preserving eggs in waterglass, in large black 'crocs' (black, glazed terracotta...

A few years ago, during lockdown 1, I took the opportunity to sell all my cordless tools, of various brands, on FB Marketplace. Actually...

"happy to advise" certainly, but you are likely to get a personal opinion/interpretation or even an adopted position that may or may not...

For your criteria another +1 for the DeWalt DWS774. I have one as well as a 250mm Makita chop saw. I'm not sure what is the difference...

I hesitate to ask, but what is the 'rod' method that you refer to Jacob? Thanks.

If I would set out to address this issue I would typically aim for overkill and future proofing. Thinking along the line of running a...

Welcome and looking forward to seeing the writing shack project in progress.

I much prefer to repair rather than replace but sometimes it's just not practical or cost effective. This looks like one of those times...

It doesn't have to be the Craftsman machine. Any similar sized belt sander could be modified in the same way. While I don't have a...