Skeety

Yes, but the same applies. Voltage drop over the length of run, where and how the cable is routed etc. In the same way that you cannot...

Exactly that! When doing the calculations for my workshop I could have got away with 10mm2, I didn't as the cost of going up to 16mm2...

I had dealings with them not so long ago and found them excellent. In my case it was sourcing a new armature for my Triton Planer but...

Thanks all :) Pretty much what I thought. My planer is now working with the new armature and brushes. I bought it faulty so have...

Hi all, I have just rebuilt a faulty Triton TPT 125 Planer. It's symptoms were sparking from the armature at the commutator end, this...

Have you tried rare earth magnets? Cheap and many different types. Strip of thin metal on one side, magnet on the other

So, I have pulled it apart and it looks mostly great. Bit of lubrication here and there. Any suggestions on where to buy parts from...

To be honest I bought it at a price I was happy with even if it needed a motor. I took a punt as they say. It looks very well looked...

If you had not suggested the brushes then that’s what I’d be advising. They are cheap and easy to replace. Your problem will be if they...

Hi All, I picked up a faulty Triton TPT125 (MK2) earlier and have just had an initial look. When the planer is powered on they are...

Recently bought 12 sheets of "12mm" and that came out mostly at 11.2mm. Few sheets of 18mm that came out at 17.1mm. Seems to be the...