Recent content by LambCrafter

My thoughts on why I use a cyclone 1. Suction basically remains consistent as the filter in the vac is not clogging rapidly. 2. As the filter is not clogging so rapidly it doesn’t need to be cleaned/changed often. 3. In my case, my vac can stay in my garage loft space (reducing the noise of...

This is my set-up (thread shortcut below): Thread 'Cyclone Dust Separator Box' https://www.ukworkshop.co.uk/threads/cyclone-dust-separator-box.143978/ I have added the HEPA H13 filter...

This is what my better half uses for her fabric crafts as it can print on ribbon. I have purchased some black-on-white tape for it and I am allowed to borrow the printer if I ask nicely. https://store.brother.co.uk/catalogs/brotheruk/devices/label-printer/p-touch/pt/pth200?sc_src=corp...

I didn’t go cheap or expensive (to me). I’ve been happy with these which came with a calibration cert and have good reviews: https://woodworkersworkshop.co.uk/igaging-ez-cal-digital-caliper-6/

Exactly, within reason. I’ve heard of people using a slightly undersized drill bit for their 5mm shelf pins to ensure a snug fit. But as mentioned in my reply to the OP, I don’t run the risk of sloppy holes (ooh err) as I don’t use my ‘multi-hole puncher’ for drilling shelf pin holes.

I have the ‘multi-hole puncher’ that’s been mentioned in this thread, but I use it for dowel joints with either the 6mm or 8mm drill guides. Not thought to use it for shelf pin holes as a) I would need to order some 5mm drill guides, b) the holes produced using the drill guides may be too sloppy...

Did a bit of Googling - there mention of a “Countershaft clutch for the Myford ML7” in the forum the link below goes to: https://www.model-engineer.co.uk/forums/search/MyFord+ml7+clutch/ Mentions the June/July 1991 issue. Any help?

I stand corrected.

Warranted Superior (it’s a brand) steel back tenon saw (12”?) I would imagine. Google gives a number of results.

Closest I can find with a lock near the front of the handle: https://heinnie.com/maratac-craft-knife-slide-lock/ Not a utility knife like your’s from Asia and with a specific replaceable blade.

Another place to look is Etsy - search for “metal makers disc”.

I found SSS to be a bit of fresh air in the charts back in the ‘80s. I have the 12” of Love Missile F1-11 in my eclectic music collection.

I would be interested in the sash clamps (to the left of the morticer) if they are available and the size/price can be advised.

Peter Millard mentions Mikita replacement splinter guard in his Tracksaw Workshop series of vids. There a link in the description of the video below: If I remember correctly I also think he mentioned in a video that you could take the splinter guard off, move it across a bit and then recut...

Made a cyclone dust separator box - sides/bottom 12mm ply, top 18mm MDF. Hooked up to my Wickes 20L vac. Will be adding a HEPA filter to the vac and a longer hose (Cen-Tec probably) for the tool later.