Search results

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. T

    An OAP among bandsaws

    That's gorgeous. I thought this was a three wheeler originally but I suspect it predates such things. Where are you located?
  2. T

    An OAP among bandsaws

    After delivering a load of slabs to a customer, we ended up coming home with a trailer of rustiness. In it are a lever mortiser machine from Reynolds, accompanying drill, a treadle lathe (maker unknown). Which are normal enough. However there are also the parts for what I suspect is quite an...
  3. T

    Old workbench with unusual feature

    It's bad enough getting my own blood onto my builds, that would be a dreadful mess! I'd lean towards it not having been used that way, the hole is near the original vise and over the top of the box-end which would act as a rather nasty reservoir.
  4. T

    Old workbench with unusual feature

    I will share pictures when it is done! I have made one replacement drawer so far following general cleaning. The sides are well out of wind so it'll be quite a job.
  5. T

    Old workbench with unusual feature

    Not surviving, nor any sign of attacment for such a thing. There is a square hole at one end, but doesn't look like a planing stop point. What would it be for? There is a large hole in one side with the remains of threads in, it's offset from the leg but I need to inspect closer to see what...
  6. T

    Old workbench with unusual feature

    Have you looked into a grant from the Heritage Crafts association? They have a round of funding at present and Plane making is on the list as a strong option. I was considering applying myself and was torn between planes and clogs.
  7. T

    Old workbench with unusual feature

    Quite, my need for a vise so I could get on with work quickly did battle with my desire to conserve the bench. In the end I compromised by fitting a vise to my modern viseless bench to work with until I can make a suitable wooden screw vise. An elegant solution to your needs! I have an...
  8. T

    Old workbench with unusual feature

    Thanks for the thoughts chaps! Same conclusions as I came to. It's built in under the tool well. A large box, with bevelled edges. When I found it the thing was clumsily planked over and these nailed down. I replaced these with a lid that matches the bevels. There are no signs of hinges. It...
  9. T

    Old workbench with unusual feature

    Hi folks, I've been lucky enough to come into this large, quite old workbench. It looks like it has been through a few stages of life, it was pulled out of a workshop in a cow shed and within it was... well lots of things. Some of them sanitary. It has this deep storage box in the middle. It...
  10. T

    When beads meet...

    Well cover me in jam and call me a scone. That is a very neat setup, thanks!!
  11. T

    When beads meet...

    Diolch! Much tidier than my original. Given the amount of movement I'm expecting scribing would be spot on
  12. T

    When beads meet...

    Hello gang. I'm doing some reconstruction work on a modern Gypsy Caravan, this involves a rebuild of the back walls, some improvements to water dispersal and some new windows and seating. The attached picture is the new frame for the lower back wall. This also supports the bed and will...
  13. T

    Moving a wood burner.

    I've seen shaker burners with very long, slightly inclined flues. Definitely an improvement I want to make as soon as possible.
  14. T

    Moving a wood burner.

    It didn't yesterday, the exterior chimney produces a good bit of draw, such that even when starting the fire it pulled smoke through before the system was dry, let alone warm. I have a CO monitor naturally.
  15. T

    Moving a wood burner.

    Condensation is a possible issue, though once it all warms up enough I think there will be enough hot, dry air to clear it. When it's set up properly, if there's any sign of moisture build up, I'll put in a drain valve. Rocket stove designs burn a little differently to the typical wood burner...
  16. T

    Moving a wood burner.

    Thanks all for your input. I decided on balance that keeping the existing chimney location was optimal, but moving the stove location to a more central one would allow better heat distribution and allow me to manage the fire from my normal work area better. Please excuse the building site...
  17. T

    Converted Hammers for Men In Shed Members with Needs

    Access to making is so important and empowering, even more so for those with accessibility issues. I'm glad others are working on accessible tools. It's a peeve of mine they aren't commercially available.
  18. T

    Moving a wood burner.

    Such thorough regulations make me proud to be British. That'll take some tea and many biscuits. Many thanks! Ahh, someone needs to watch The Great Escape again! ;) I've tried the fan, added insulation etc but it's not enough really. When I build the new stove I am planning on putting in either...
  19. T

    Finishing

    I'd go for the toughest paint I could get in that situation. Once the kit is set up on it, they won't want to take it all off to touch up the few high-traffic areas.
  20. T

    Commercial Steam Benders?

    I'll drop you a pm. May be able to help.
Back
Top