Robbo3's latest activity

I screw a countersunk magnet to the end of mine so that it sticks to whatever machine I'm using at the time but mainly for the lathe so...

3 x 3/4 x 16 tpi taps, 2 starter & 1 bottom 1 x 3/4 x 16 tpi die Would prefer that they don't all go to the same person. Yours for the...

Agreed. But it can be done if you take it slowly. This is a 300mm cut with a 6tpi blade where I was too lazy to change the blade for...

EthAnswers proved this in a video posted 6 years ago -

Cut one clockwise & the next anticlockwise. Hopefully all the blanks won't be too big to cut the anticlockwise ones.

Dalman UK have bought their stock of planks & woodturning blanks (&, I believe, the customer data base). - https://www.dalmannuk.com/

FYI: If you find one you can attach a copy here for anyone to download.

FYI: Morse tapers should be clean & dry. They should remove easily with a light tap from a knock out bar.

Agreed, but if steb drive centre fails to bite it can bore into the wood especially if it's punky. Applying too much pressure with a...

Really you need to know the correct stem size. I see from the post at the top of the woodturning section that the Coronet Envoy takes a...